Description
AVA205P-B fully compliant implementation of H.264 (MPEG 4, Part 10) provides 1920x1080 megapixel resolutions , IP addressable camera. Camera has main stream and assistant stream, can support ONVIF protocol, privacy block, motion detection and OSD character overlay. AVA205P-B provides an all-in-one solution with integrated a high sensitivity ultra low light CMOS sensor, a lens and a vandal resistant hosing enclosure with rated IP66 protection. Camera can view full resolution and low resolution images at the same time, and both of streams work well without affecting of bandwidth. The camera offer real time image with full frame rate, up to 6X resolution on stander cameras.
AVA205P-B allows for color imaging in near complete darkness because of its ultra low light performance, has superior low light sensitivity, making it provide the best night image.
Bid Specification
- The camera shall utilize a high sensitivity 2.07 Megapixel CMOS sensor with 1/1.8” optical format.
- The camera shall integrate a 4 mm megapixel lenses, F1.4, mount M12
- The camera shall have vandal resistant hosing enclosure with rated IP66 protection.
- The camera shall offer color imaging in near complete darkness
- The camera shall support a minimum illumination of 0.001Lux @ F1.4 ( Color version only)
- The camera shall support a minimum illumination of 0.002 Lux @ F1.4 ( M onochrome version)
- The camera shall be H.264 (MPEG4, Part 10) compliant.
- Camera shall have main stream and assistant stream, both of streams up to 30fps at the same time
- The camera shall be equipped with a 100 Mbps LAN connector
- The camera's shutter speed shall be 1/1000ms – 1/2ms
- The camera shall have Real Time Streaming Protocol (RTSP) support allowing for compatibility with media players such as Apple QuickTime, VLC Player and others.
- The camera shall output at a maximum resolution of 1920 ( H ) x 1080 ( V ) @ 30fps
- The camera shall feature streaming of the full field of view (FOV) and multiple regions of interest (ROI) for forensic zooming.
- The camera shall be equipped with a 100 Mbps LAN connector and can deliver image data at a maximum data rate of up to 64 Megabits per second (64 Mbps).
- The camera shall provide 10 levels of compression quality for optimal viewing and archiving.
- The camera shall support a minimum HTTP, RTSP, RTP over TCP, RTP over UDP network protocols.
- The camera shall feature automatic exposure, automatic multi-matrix white balance, shutter speed control, programmable brightness, saturation, gamma and sharpness.
- The camera shall also feature selectable 50/60 Hz flicker control.
- The camera's primary power source shall be Power over Ethernet (PoE) complying with the IEEE 802.3af standard.
- The camera shall have the alternative option to be powered from a 12V DC, power source providing at least 3 W of power.
- The camera shall be utilized for indoor and outdoor applications.
- The camera fully compliant ONVIF protocol
Quick-Spec
Minimum Performance Specification
Megapixel camera must meet the following operating requirements
Operational
Imaging 2 .07 megapixel CMOS image sensors
1/ 1.8 ” optical format Bayer mosaic RGB filter
Active Pixel Count
1920 (H) x 1 080 (V) pixel array Minimum illumination
Color Mode : 0.001Lux@F1.4 M onochrome Mode : 0.002Lux@F1.4
Dynamic range 80 dB
Maximum SNR 50 dB
Full Field of View (FOV) Resolutions 1920 ( H ) x 1080 ( W ) HDTV-1080p
640 ( H ) x480 ( W ) VGA resolution
Data Transmission
Data rate
bit rate control from 100Kbps to 10Mbps
Video frame rate up to:
25 fps @ 1920 x1080 ( Main Stream )
25 fps @ 64 0x480 ( Auxiliary Stream )
Compression type
H.264 (MPEG4, Part 10)
Motion JPEG
Programmability Auto Exposure (AE) and Gain Control (AGC) >120dB
Programmable backlight compensation
Auto multi-matrix white balance
50/60Hz selectable flicker control
Electronic pan, tilt, zoom (PTZ)
Electronic image flip - 180 degree rotation
Programmable shutter speed to minimize motion blurs
Programmable resolution, brightness, saturation, gamma, sharpness, tint
Electrical General purpose opto-coupled input and output
Power over Ethernet (PoE): PoE 802.3af
DC input: auxiliary 12VDC
Power consumption 3 Watts maximum
Mechanical Dimensions( LxWx H ) 242 m m x 83mm x83 mm
Weight 464g |